Notifier XPP-1, Processor Module For XP Series Transponders
Condition:
* Used, Removed From Service In Working Condition.
* Sold As-Is. As Pictured.
Additional Notes:
* Notifier’s XP Series Transponders are controlled by the XPP-1 Processor Module. The XPP-1 is the only required module in the XP Transponder system.
* The XPP-1 provides two Form-C relays plus one monitoring point that can be mapped into the FACP system.
* The base address for the XP Transponder is set by two rotary switches on the module.
* This module controls up to three XPC, XPR, or XPM expansion boards installed in any combination in the system:
• XPM-8 Transponder Monitor Module provides eight Style B or four Style D Initiating Device Circuits.
• XPC-8 Transponder Control Module provides eight Style Y or four Style Z Indicationg Appliance Circuits
• XPR-8 Transponder Relay Module provides eight single Form-C or four dual Form-C dry contact relays.
Notifier
XPP-1
![DEWALT 1-Piece 4"x22" SDS Max Core Bit [DW5925]](https://www.electrictooltrail.com/wp-content/uploads/2026/10/dewalt-1-piece-4-x22-sds-max-core-bit-dw5925.webp)